מד טמפרטורה INKBIRD IBS-P01R
מד טמפרטורה צף- לבריכות, לאמבטיה לתינוקות ועוד
כולל- מצוף למדידת הטמפרטורה + מסך נפרד
חיבור אלחוטי עד כ90 מטר
עמידות במים בתקן IPX7
טווח מדידה -40℃~70
מחיר לאחר קופון:$27.47
לרכישה | קופון SALAMTAK0810
מד טמפרטורה INKBIRD IBS-P01R, תיאור מלא מאתר Aliexpress-
About this item
- 🛀Wireless Connection: The maximum connection distance is 300 feet. You can check temperature readings with the receiver without going outside the room.
- 🛀Accurate Reading: Support both Fahrenheit and Celsius readings.
- 🛀Premium quality: The thermometer has adopted high quality materials, it is solid and durable.
- 🛀Multiple Uses: The IPX7 waterproof thermometer is ideal for Indoor&Outdoor use like swimming pools, Fish Ponds, aquariums, baby bath, spas etc. Wireless remote sensor temperature measurement range: -40℃~70℃(-40℉~158℉).
- 🛀Attention:After installing, please pay attention to tightening the product to prevent water.
● MAX/MIN/CLEAR:
- Quickly press: press to display the maximum minimum temperature. When there is no button operation, the current temperature display will be restored after 30s.
- Long press(5s): long press to clear the maximum inimum temperature record value, then re-record.
●TX
- Quickly press: send temperature data to the Temperature and humidity monitor, when the transmission is successful, the red light of wireless remote sensor will flash once.
- Long press(5s): reset the synchronization between the Wireless remote sensor and the Temperature and humidity monitor. Sensor displays CH8, indicating that the reset is successful.
- After resetting, the wireless remote sensor needs to be powered on again (Can be synchronized within 2 minutes after the wireless remote sensor is re-powered on)
- When synchronizing try to make the Wireless remote sensor close to the Temperature and humidity monitor and please do not press any button.
●Flexible
- add an Inkbird M1 WiFi Gateway (sold separately) to pair with Pool Thermometer for data and alerts via the Internet.
Button Icon Description
●CH/R:
- Quickly press: press to switch the current channel and the wireless remote sensor can be fixed in the current channel.
- When switching to”CH8″, after 5s, the temperature and humidity of Wireless remote sensors will be displayed in turn, each will show 5 seconds.
- Long press(5s):It can reset the synchronization between the Temperature and humidity monitor and all Wireless remote sensors. After resetting, the Wireless remote sensor needs to be re-powered (Re-install the battery) before it synchronize with the Temperature and humidity monitor. (within 2 minutes).
●°C/°F:
Quickly press:
- When in normal working mode, press to switch(Temperature and humidity monitor and Wireless remote sensors) temperature unit to°C or°F
- When the display is showing the maximum minimum temperature(press MAX/MIN/CLEAR button to display the maximum minimum temperature), press to switch the maximum and minimum recording time interval of temperature to ALL-TIME or 24 hours.
